Fitting a picatinny is extremely straight forward. We run through the process in this video and go over a few points to look for when buying a rail.Continue Reading... No Comments.
A video of the Schultz & Larsen Legacy features. We demonstrate the rifle take down and cover the various options and features of the short action rifle.Continue Reading... No Comments.
It’s important to use the correct tools with your Krieghoff K-80. Using the wrong sizes can damage the screws for future use. In this video we cover all of the adjustment screws and what wrench or tools they use.Continue Reading... No Comments.
In this video we take a look at the Weaver and Picatinny Bases. The two specifications differ slightly, with Weaver slots measuring 4.57mm wide and Picatinny slots measuring 5.23mm wide. This means that Weaver Rings will fit in to both Weaver and Picatinny Bases. Picatinny Rings are a wider profile and are too wide to […]Continue Reading... No Comments.
This is a useful method to quickly find out the scope mount height you need for your scope. Taking two quick measurements, you can work out the minimum mounting height required for your scope. We measure the Objective Lens Outer Diameter and also the Mid Tube Diameter, then use these measurements to determine the distance […]Continue Reading... No Comments.
In this video we take a look at the ERATAC Adjustable Inclination Mount, produced by Recknagel. The One-Piece Picatinny Mount allows you to adjust the MOA from 0 to 70 or Mil-Rad from 0 to 20.Continue Reading... No Comments.
In this video we run through three adjustments you can make to your Krieghoff K-80 or K-20. Locking the Safety, locking the selector position and positioning the trigger blade.Continue Reading... No Comments.
A short video to demonstrate how to remove and attach the barrel on a S&L Victory with walnut stock.Continue Reading... No Comments.
A short video to demonstrate how to remove and attach the barrel back on to a Schultz & Larsen Classic Synthetic.Continue Reading... No Comments.
We get asked how to do this very often, so here is a short video showing you how to take the ejectors out and put them back in. Taking your barrels, give the ejectors a firm tap to free them away from the spring and ball pressure. We use the handle of the Krieghoff Stock […]Continue Reading... No Comments.